What makes LSR6328P so special? For starters, this masterpiece incorporates all the new technology at JBL – Advanced Room Mode Correction (RMC), Differential Drive technology, Built-in Boundary Compensation, Linear Spatial Reference (LSR) technology, and mounting options. JBL has laid a strong foundation with six decades of research backed by state-of-the-art infrastructure.

LSR6328P is an out-of-the-box solution for colored sound, standing waves, compromised bass response, problematic room modes, and incorrect response at the mix position.

JBL understands that on-axis response measurement is grossly insufficient to provide your trained ears with all the critical parameters for judging sound at the mix position. Equipped with Linear Spatial Reference design, LSR6328P scouts the entire sound field looking for reflections, radiations, reverberations, and other off-axis parameters to optimize response at the mixing chair.

To satiate consumer appetite for ultra-fine response from the studio monitors, JBL has enhanced its transducers and power system. An 8-inch woofer based on Differential Drive® technology and supported by two voice coils that enhance surface area for effective heat dissipation makes it possible to reduce spectral shifts resulting from power compression at higher power output levels. To avoid audible distortions or extreme excursion at peak levels, an electromagnetic coil is placed between the two voice coils to serve as a dynamic brake.

The tweeter is programmed with patented technology and uses titanium composite materials for better transient response and little distortion. The magnetically shielded high frequency transducer is integrated with Elliptical Oblate Spheroidal (EOS) waveguide for smooth imaging properties. It ensures whether you are on-axis but far away from the speaker or even off-axis, you'll hear an accurate representation of the frequency response.

While RMC system is used to identify and analyze dominant low frequency standing wave in the studio room for generating accurate response, an RMC Calibration Kit is available as an accessory, providing you with all the items required to fine-tune your LSR system.

Apart from packaging the JBL with performance features, LSR6328P is fit with mounting points on its reinforced enclosures, making it safe and easy for wall mounting. In a nutshell, JBL LSR6328P comes ready-to-serve.

Key Features:

• Optimized frequency response is measured on- and off-axis via advanced LSR design that overcomes reflected sound to improve mid and high frequency accuracy
• RMC™ analyzes and corrects bass problems arising from room modes, particularly when used together with the LSR6312SP Subwoofer. RMC Calibration Kit turns the power and knowledge of electronic control into your hands
• With dual voice coil and shielded dynamic brake, together called Differential Drive® technology, LSR6328P has greater surface area for expelling heat resulting in better peaks with less power compression
• Bi-amp power system with over 250 watts of continuous low frequency power and 120 watts for the high frequency section
• Factory calibrated, preset boundary compensation switches to restore accurate bass response whether the speakers are mounted or placed in disturbing work spaces
• Titanium composite, magnetically shielded high frequency transducer reduces distortion and improves transient response without harming video devices.
• Coupled with EOS waveguide for precise pattern control
• High-Density baffle ensures low enclosure resonance and high inertial ground
• Contoured Linear Dynamics Aperture port eliminates port turbulence and compression
• Wall mounting option with convenient mounting points and handles on reinforced enclosure

For more information, refer to these documents:

• Brochure
• Spec Sheet
• Manual
• Photos